saw frame : This is rigid construction & runs in prismatic guide ensuring a parallel cut. This cut takes place on the draw stroke & hydraulically lifted out of contact with the workpiece on the forward stroke to prevent wear or the blade & cut out metals of all kinds & strength.

feed : Two leavers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor switched off on completion of the cut.

bed : The bed is of large production provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remaines fixed & the other can be adjusted according the material to be cut.

electrical equipment : A direct on line push button starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduces to minimum.

drive : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed.

speed : The incorporation of two speed driving mechanism allows for the most  suitable speed to selected for material bging cut.

Coolant: The coolant tank is totally enclosed in the machine base & speed pump supplied coolant to the saw blade through a stay put pipe & top.