"syndicate" power Operated guillotine shearing machines are sturdily constructed and are designed for accuracy and dependability.

side frames : Are of solid plates designed for maximum rigidity to eliminate deflection and to withstand continuous high speed performance at full capacity.

bed or table : Is of closed box type construction, which forms a rigid backbone for the shear and a solid backing for the lower knife. Additional ribs under the table adds to its strength.

cutter beam : The ram is of solid steel plates, accurately machined. The ram brace is bolted to the ram to adjust the camber which may result after long use. The Ram moves in taper guides. this facilities easy adjustment of clearance between ram & table, for cutting various thickness. Counter Balance springs are provided in over crank shearing machines of above 2500 x 8 mm Capacity to counter act the weight of the ram & ram brace, thus giving smooth shearing action.

crankshaft :  Is of forged steel, accurately machined and runs is gun metal bushes. Flywheel shaft runs in ball bearings.

hold down : Steel fabricated and is used for clamping the plate securely to the table while being cut. Spring loaded mechanical hold down is provided in all machines. However, in machines of 6 MM capacity & above, pressure arms fitted to the cross support, are provided for additional grip, before cutting.

hydraulic hold down (optional) : Hydraulic hold down can be provided in over crank shearing at extra cost. It maintains a positive & Uniform pressure along the full length of the work piece, preventing slippage, Provision is kept for adjusting hydraulic pressure. The pressure of each hold down unit is ample to securely hold even a short piece which comes under only one hold down plunger.

rolling key clutch : Made of alloy steel for positive engagement and continuous operation, having three key way in the en - 8 insert.